You are here:

THERMAL BOARDS

KLIMA THERMALBOARD INSULATION

THERMAL BOARDS

This product will ensure your Klima underfloor heating mats operate more efficiently, they are designed to go under the heating mat and reflect heat back upwards ensuring more cost efficient operation of your system.

Very simple and easy to fit and can be cut using a Stanley knife for easy installation.

KLIMA Thermal Board Kits make it possible to introduce extra floor insulation where the structure height is very limited. Because of the compression resistantproperties of the insulation plates, a floor heating system (KLIMA Mat) and a tiled floor can be laid directly on top using adhesive

The Thermal Board raises the insulating properties of the underlay and increases the yield and reaction times for the floor heating system that has been installed. The insulating properties result in lower energy consumption.

Available from:

PRODUCT INFO

KLIMA Thermal Board Kit 3 m² is supplied as 5 plates 60 x 100 x 1 cm.

KLIMA Thermal Board Kit 4,8 m² is supplied as 8 plates 60 cm x 100 cm x 0,6 cm.

Technical Details

  • Resistant to damp and rotting
  • Fire-proof
  • Very low moisture absorption
  • Suitable for KLIMA Mat
  • Fire resistance: DIN4102 material class B1
  • Water resistance: water absorption>0.5% after 28 days under water and in accordance with DIN53 421
  • Temp. resistance:-30 to +70 °C
  • Insulation value: 0.035 W/mK in accordance with DIN4108 (6mm has a U value of 4.762 & the 10mm has a U value of 2.857)
  • Compression strength: > 0.20 N/mm2 in accordance with DIN 52 615
  • 6mm Noise reduction is 12 Db & for 10mm Noise reduction is 20 Db

Frequently Asked Questions

Question
Answers
Views

Screed over the top?

0

answer

0

views

No answer found

Garage Door

0

answer

2

views

No answer found

thermal boards

1

answer

42

views

Answer:-

Hi there , Our thermal boards need to be installed onto a stable label subfloor , so for your install it would be recommended to either lay the thermal boards ontop of the screed that will be poured or if not then a chipboard/plywood subfloor can be laid ontop of that.

Mat thickness

0

answer

37

views

No answer found

wall insulation?

0

answer

48

views

No answer found