You are here:

Underwood Heating Foil Mat

Underwood Heating Foil Mat

Underwood Heating Foil Mat

Electric floor heating foil for under floating Wooden floors. Only 3mm thick for installation directly beneath wood or laminate

Size

Thermostat

Available from:

Product Description

The Klima Under Wood Heating Foil Mat is designed for laying under a floating wooden floor such as a Laminate or Engineered click together type Wooden flooring system. The installation does not require any glue or adhesives, but it must be installed on top of a PS Insulation type material that has a minimum thickness of 5mm.

  • 10 year Warranty on Klima Foil Mat
  • CE Approved
  • 28 Years Supplying the Trade

Kit Contents

  • Klima Heating Foil mat
  • Installation instructions
  • Flexible Sensor Tube

Additional components required

  • Thermostat and Floor Sensor
  • PS Insulation minimum thickness 5mm

Full technical support is provided by our experienced UK technical assistance team so you can ensure you purchase the correct system. We’ll assist you during installation and we’re here to help with any issues following installation.

Benefit

– Even cost-effective heat spread across the entire surface of the wooden floor

– Easy and quick installation

Please Note

The heating cable CANNOT be cut, however the aluminum mat can be cut (making sure the heating cable is not damaged) and shaped to fit awkward shaped areas.

A Heat Loss calculation is always recommended to determine whether the system can be used as a primary heat source.

We recommend that you check with your floor covering supplier for compatibility.

You also require minimum 5mm PS insulation

Installation

  • Always ensure that the minimum 5mm PS Insulation is laid before the Foil mat is rolled out
  • Measure the area you want to install the Foil mat in, you must maintain a MINIMUM gap of 50mm from walls and fixed furniture. DO NOT INSTALL UNDERNEATH ANY FIXED FURNITURE
  • Lay the first run of Foil Matting. At the end of the run cut the aluminum foil, leaving the heating cable, turn the Foil mat 90 degrees or 180 degrees depending on requirements and continue laying.
  • Once you have laid all the foil mat out make sure any exposed heating cable is covered with aluminum tape
Foil Mat Instructions (Click on me)
PLEASE FOLLOW THE FOIL MAT INSTRUCTIONS FOR A MORE DETAILED INSTALLATION GUIDE.

Technical Details

Specification for Foil mat

Nominal Voltage

230 Volts

Wattage per m²

140 W/m²

Connecting Wire

3 x 1.5mm²

Connecting Wire Length

5 Metres

Heating Cable Diameter

3 mm

Wattage per Linear Metre

10.5 Watts

Cable Standard

IEC800 Class 11

Heating Element Guarantee

10 Years

Kit Content

Our Foil mat is only 3.5mm in thickness making it a simple installation within any floor construction.

With this you are also supplied a 2.5 meter Black hollow conduit pipe and installation instructions.

Additional components

Thermostats (3 Version available) all come with a floor sensor

(IF selected in the thermostat options)

You will require a minimum 5mm PS insulation boards.

Recommend one is found @ Screwfix Product Code: 68038

Brand

Klima Underfloor Heating Systems

Whether heating up a tiled or wooden floor, demisting a mirror or defrosting pipes, Klima can offer you the perfect wet or electric heating solutions. As specialists in electrical heating, Klima has many years of experience in the development, maintenance and after sales/support of all kinds of electrical and water heating systems as part of many large retailers for many years.

Klima Underfloor Heating is part of the Magnum Group which is a major European manufacturer of Water & Electric Underfloor Heating systems, with its factory based in Holland and it’s UK Head Office based in Scotland. We only manufacture the highest quality products and all our systems come with the highest European Certifications meaning we can offer long realistic warranties on all our product range and a full comprehensive manufacturers support service. Klima has supplied some of the leading wholesales throughout the UK, last year we sold over 20,000 Klima mats. Here are some of the reasons why Klima is the best choice for your underfloor heating requirements.

Buying Klima Underfloor Heating Systems.

    • Quick easy ordering process by website or telephone.
    • Directly supplied by the manufacturer ensuring the lowest prices and great service support.
    • Highest European approvals and certifications on all products ensuring quality & reliability.
    • Over 25 years of Manufacturing & Supplying Underfloor Heating Systems.
    • UK based technical support service, along with a full CAD design service ensures your total support along the whole design/purchase/installation process.
    • Fast free delivery anywhere in the UK mainland.
    • 50-year Water Pipe warranty & Lifetime Warranty on Klima Electric Heating Mats.
    • Grundfos A rated Pumps.

Frequently Asked Questions

Question
Answers
Views

lvt flooring

1

answer

17

views

Answer:-

Hi there , the Foilmat is designed for a click together laminate/engineered floating wooden floor finish. It CANNOT be used under a LVT floor finish.

Carpet?

1

answer

31

views

Answer:-

Hi there , this system is designed only for a click together laminate / engineered floating wooden floor finish.

Is the Underwood Heating Foil Mat 1 sided?

1

answer

66

views

Answer:-

Hi there There is no particular side in which the foilmat has to be installed as its a uniform covering of a aluminum covering either side.

Vinyl

0

answer

69

views

No answer found

PS Insulation Type

1

answer

100

views

Answer:-

Hi there With the PS underlay we recommend a 5mm minimum thickness to be used, we have examples below of what PS underlay we would recommend to use Screwfix : https://www.screwfix.com/p/vitrex-premier-wood-laminate-underlay-boards-9-76m-/68038 B&Q : https://www.diy.com/departments/vitrex-classic-5mm-foam-laminate-solid-wood-underlay-panels-9-76m-/5011204608997_BQ.prd