Electric Underfloor Heating Mat
Electric Floor Heating Mat for under Tiles and can be adapted for under Vinyl (see instructions). Fully waterproof and earth sheathed with VDE certification in conjunction with our LOT 20 approved thermostats.
The range is supplied in sizes from 1sqm to 10sqm mats and can be wired in parallel to cover larger floor areas.
Product Description
klima Electric Underfloor Heating Mats provide an effective and efficient underfloor heating system that can work with tiles, and similar floor finishes or can adapt to many other types of finishes.
Lifetime Warranty on Heating Mat
VDE Approved when installed with our touch control thermostat
Supplied Directly from the Manufacturer
25 Years Supplying the Trade
Complete kit with choices of thermostats
Every FloorHeating-Direct Under Tile Heating Mat is VDE certified, when installed with our Touch Control Thermostat, and comes with a lifetime warranty. Full technical support is provided by our experienced UK technical assistance team so you can ensure you purchase the correct system. We’ll assist you during installation and we’re here to help with any issues following installation.
FloorHeating-Direct Under Tile Heating Mat kits contains everything you need to install the system, including a detailed colour instruction manual.
FloorHeating-Direct offers 3 different thermostats; from simple manual to a wifi thermostat, for you to complete the kit of your choice.
Benefits
Economically warms the entire surface of the tiled floor
Easy and quick installation
Primary or comfort heating
Please Note
The heating cable cannot be cut, however the mesh it is mounted on may be cut and shaped to suit;
For the best results we always recommend installing the mat on an insulated sub floor or thermal board;
A Heat Loss calculation is always recommended to determine whether the system can be used as a primary heat source;
We recommend that you check with your floor covering supplier for compatibility.
Our largest size mat is 10sqm, for sizes above this we will use multiple mats e.g 20sqm mat set = 2 x 10sqm mats
Installation
Always ensure the subfloor is insulated. The mat can be installed directly onto a concrete floor or if installing on a wooden subfloor it must be flat and stable and the mat covered with a self levelling compound.
Measure the area you require first and allow a 50mm gap from the edge of the room and any furniture. DO NOT INSTALL UNDER FIXED FURNITURE.
Lay the first run of matting. At the end of the run cut the fibreglass mat leaving the heating cable, turn the mat 90º or 180º, depending on requirements, and continue laying.
Once completed the entire floor, you can cover the mat with a self leveller and leave to dry before tiling. The matting should not be turned on for minimum 14 days after installation
Technical Details
The Heating Mat System is constructed of a tough open nylon mat with an integral conductor and resistance cable. It is only 3.5mm thick and well able to withstand tough installations and is installed directly within the flexible tile adhesive.
The insulation covering of the heating element is made from Chrome/Nickel resistance wire with FEP insulation and the external covering is woven wire braid with a further PVC sheath making it very durable and 100% waterproof. 15.7 watts per metre resistance wire.
Construction: FEP Insulation with PVC outer sheath
Wattage: 15.7 Watts per meter – 230/240 Volts
Tested range: 4000-10,000v
Cable Diameter: 3 mm
Certifications: FI / CE / VDE
Kit Content
- Underfloor Heating Mat
- Instruction Manual
- 10mm flexible conduit pipe for floor sensor
- Thermostat (Optional)
Thermostat
1
answer
24
views
Answer:-
Hi there , all our controllers/thermostats can be used with our Underfloor heating systems.
Smart Thermostats
0
answer
33
views
No answer found
How much to run
1
answer
91
views
Answer:-
Hi there , Our mats for Underneath tiles consume 150watts per sqm , and Our Underwood Heating Foilmats consume 140 watts per sqm when in use. You would need to confirm your size of mat used and do a heat loss calculation to determine how efficient your system would be.
How many thermostats?
1
answer
85
views
Answer:-
Hi there , You can wire 2 mats in parallel into the back of the thermostat on the wall if your needing 3 mats or more for 1 area then please call us on 01887 822020.
location of thermostat
0
answer
70
views